Intel S5520SC Specifikace stáhnout pdf (Strana 38)

Functional Architecture Intel® Workstation Board S5520SC TPS

Revision 1.7

Intel order number: E39530-010

Workstation Board CPU Socket DIMM Identifier Channel/Slot

F2 (Black) Channel F, Slot 1

Figure 15. Intel

Workstation Board S5520SC DIMM Slots Arrangement

3.3.2 Supported Memory

z Intel

Workstation Board S5520SC supports up to 12 DDR3 DIMMs with 1.5 V and a

maximum of 192 GB memory capacity.

z Intel

Workstation Board S5520SC supports Registered DDR3 DIMMs (RDIMMs),

and ECC Unbuffered DDR3 DIMMs (UDIMMs).

 Mixing of RDIMMs and UDIMMs is not supported.

 Mixing memory type, size, speed and/or rank on this platform has not been

validated and is not supported

 Mixing memory vendors is not supported on this platform by Intel

 Non-ECC memory is not supported and has not been validated in a server

environment

z Intel

Workstation Board S5520SC supports the following DIMM and DRAM

technologies:

 RDIMMs:

– Single-, Dual-, and Quad-Rank

– x 4 or x8 DRAM with 1 Gb and 2 Gb technology - no support for 2 Gb

DRAM based 2 GB or 4 GB RDIMMs

– DDR3 1333 (Single- and Dual-Rank only), DDR3 1066, and DDR3 800

 UDIMMs:

– Single- and Dual-Rank

– x8 DRAM with 1 Gb or 2 Gb technology

– DDR3 1333, DDR3 1066, and DDR3 800

3.3.3 Processor Cores, QPI Links and DDR3 Channels Frequency Configuration

The Intel

Xeon

5500 series processor and Intel

Xeon

5600 series processor connects to

other Intel

Xeon

5500 series processors and Intel

Xeon

5600 series processor and Intel

5520 IOH through the Intel

QPI link interface. The frequencies of the processor cores and the

QPI links of Intel

Xeon

5500 series processor and Intel

Xeon

5600 series processor are

independent from each other. There are no gear-ratio requirements for the Intel

Xeon

Processor 5500 Series and Intel

Xeon

5600 series processor.

Intel

5520 IOH supports 4.8 GT/s, 5.86 GT/s, and 6.4 GT/s frequencies for the QPI links.

During QPI initialization, the BIOS configures both endpoints of each QPI link to the same

supportable speeds for the correct operation.

During memory discovery, the BIOS arrives at a fastest common frequency that matches the

requirements of all components of the memory system and then configures the DDR3 DIMMs

for the fastest common frequency.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 191 192

Komentáře k této Příručce

Žádné komentáře

Intel S5520SC Specifikace Strana 38

Komentáře k této Příručce

Související produkty a manuály pro Základní desky serveru / pracovní stanice Intel S5520SC