Intel 815 Uživatelský manuál Strana 123

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 213
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 122
I/O Subsystem
R
Intel
®
815 Chipset Platform Design Guide 123
Figure 63. Recommended USB Schematic
15 k
15 k
15
15
47 pF
47 pF
ICH
P+
P-
USB connector
< 1"
< 1"
90
45
45
Driver
Driver
USB twisted-pair cableTransmission line
Motherboard trace
Motherboard trace
USB_schem
The recommended USB trace characteristics are as follows:
Impedance ‘Z0’ = 45.4
Line delay = 160.2 ps
Capacitance = 3.5 pF
Inductance = 7.3 nH
Res at 20 °C = 53.9 m
10.5 I/O APIC (I/O Advanced Programmable Interrupt
Controller)
Systems not using the I/O APIC should comply with the following recommendations:
On the ICH
Connect PICCLK directly to ground.
Connect PICD0, PICD1 to ground through a 10 k resistor.
On the processor
PICCLK requires special implementation for universal motherboard designs. See Section
4.2.9
Connect PICD0 to 2.5V through 10 k resistors.
Connect PICD1 to 2.5V through 10 k resistors.
Zobrazit stránku 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 212 213

Komentáře k této Příručce

Žádné komentáře