
Intel® Solid-State Drive DC S3500
Product Specification April 2013
24 Order Number: 328860-001US
5.5 Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and
health of the Intel SSD DC S3500 can be reported to the host on request through the
Device Statistics log as defined in the ATA specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04
and is accessible using READ LOG EXT, READ LOG DMA EXT or SMART READ LOG
commands.
Table 20 lists the Device Statistics supported by the Intel SSD DC S3500.
Table 20. Device Statistics Log
Equivalent SMART
attribute (if
applicable)
0x01 – General Statistics
Num Write Commands – incremented by one
for every host write
Num Read Commands – incremented by one
for every host read
0x04 – General Error Statistics
Num Reported Uncorrectable Errors
Num Resets Between Command Acceptance
and Completion
0x05 – Temperature Statistics
Device Statistics Information Header
Average Short Term Temperature
Average Long Term Temperature
Highest Average Short Term Temperature
Lowest Average Short Term Temperature
Highest Average Long Term Temperature
Lowest Average Long Term Temperature
Specified Maximum Operating Temperature
Time in Under-Temperature
Specified Minimum Operating Temperature
0x06 – Transport Statistics
Number of Hardware Resets
Number of Interface CRC Errors
0x07 – Solid State Device Statistics
Percentage Used Endurance Indicator
E9h
Note: This device statistic
counts from 1 to 150
Komentáře k této Příručce