Intel SERVER SYSTEM SR2500AL Uživatelský manuál stáhnout pdf (Strana 103)

Intel® Server System SR2500AL User’s Guide 81

Installing and Removing the Server Board

Installing the Server Board

1. Observe the safety and ESD precautions at the beginning of this book. See “Safety

Information”.

2. Power down the server and unplug all peripheral devices and the AC power

cable(s).

3. Remove the server system cover. For instructions, see “Removing the System

Cover”.

4. Remove the processor air duct. For instructions, see “Removing the Processor Air

Duct”.

5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser

Assembly”.

6. Remove the optical drive cable if installed.

7. Remove the bridge board. For instructions, see Figure 61 “Removing the Bridge

Board from the Server System” on page -71.

8. Remove the large air baffle. For instructions, see “Removing the Large Air Baffle”.

9. Remove the fan module assembly. For instructions, see “Replacing a Fan Module”.

10. Place the server board into the server system as shown in the figure below (see

letter “A”), and attach the server board with six screws (see letter “B”).

Figure 71. Installing the Server Board

AF000025

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 209 210

Žádné komentáře

Intel SERVER SYSTEM SR2500AL Uživatelský manuál Strana 103