Intel 130T Uživatelský manuál stáhnout pdf (Strana 13)

Testing a cable

Here’s an easy way to test the link integrity of a cable:

1 Plug one end of the cable into the Daisy-chain port.

2 Plug the other end of the cable into port 2X.

3 Check port 1 and port 2 Speed LEDs on the front of the unit.

If these ports are lit, you have a functioning straight-through cable.

If the ports are unlit, remove the cable from the Daisy-chain port and

reinsert it in port 1X. If the Speed LEDs for ports 1 and 2 are on, you

have a functioning crossover cable.

If the LEDs are unlit, you have a bad cable.

If a cable passes either of these tests, but the network connection is

slow, verify that wires 1 & 2 and 3 & 6 on the cable are twisted pairs.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Žádné komentáře

Intel 130T Uživatelský manuál Strana 13